Ultimate Amiga
Ultimate Amiga Emulation => PSPUAE => Archived PSPUAE Threads => Topic started by: Dezorian on April 14, 2007, 12:36:37 AM
-
Hi there, i am the new one!
I just got my psp 3.10 oe-a, played lots of roms, but then i remembered the best RPG of all time: Ambermoon.
To play it i had to install psp-uae, wonderful. But now i kind of seem to miss a hdd to install it on. it has 12 disks or something...
And how do i create bootdisks, savedisks like the game wants me to do...
I just noticed in the upper right corner of the screen that my hdd seems to be 5 mb`?...is this the max?
Hope someone can help me,
Dezo
-
Hi there, i am the new one!
I just got my psp 3.10 oe-a, played lots of roms, but then i remembered the best RPG of all time: Ambermoon.
To play it i had to install psp-uae, wonderful. But now i kind of seem to miss a hdd to install it on. it has 12 disks or something...
And how do i create bootdisks, savedisks like the game wants me to do...
I just noticed in the upper right corner of the screen that my hdd seems to be 5 mb`?...is this the max?
Hope someone can help me,
Dezo
Hi, and welcome,
HDD? there is no hd support as yet, its still being worked on. So im abit unsure what you mean by HDD. I havent played AmberMoon before, so im not sure about running it in PSPUAE. If no one else can help, ill take a look and see if I can help.
-
ambermoon > 1.04 runs fine from the floppy disks (just put in disk a, cpu to 68020+fpu, 4 meg fast + 2 meg chip, ks 3.1 and reset ... put in the other disks when asked). and make sure you made a savegame disk j with winuae (or pspuae, but you'll have to boot from a wb install disk first and then open the ambermoon setup program).
and fol, go and play ambermoon, now! :>
really one of the best rpgs of all time (next to albion though, hehe)
-
Well, i just copied the new release of pspuae over my old christmas one and now when i put in a disk in my drive and go back to the drive-screen to load up the disk, the screen just freezes and the psp turns off.
Damn, why do i get these probs, just like the probs i have with custom ps1 games to get working.
By the way, i copied everything to the folder "psp\game150", don't know the difference between game, game150 and game310...
Ah ja, spreche auch deutsch. ;)
Log 10:57am:
I was able to overcome the gruesome slaughter of shutdown, and am now avengefully trying to start Ambermoon, yet again.
Hear how my story goes: I am introduced to the "Out of memory for fastmem card" screen after resetting (like i was told to).
It just keeps appearing and doesn't get tardy, it is evil. Bloody hell, how this is bothering me. And is it by any chance normal for my psp to lock after trying to get back out of pspuae with the home button resulting in an "please wait" that goes nowhere but for me to take out the battery so my psp regains conciousness?
My config of system:
Quote from cmf: "just put in disk a, cpu to 68020+fpu, 4 meg fast + 2 meg chip, ks 3.1 and reset" -->Error-Screen
From what i understand i had to place a 68020/68881 cpu, or what does fpu mean? Well, i did chose the one i mentioned.
Then i added 4 megs for fastmem, 2 megs for chip, 1 meg for bogomem and ks to 3.1, then resetted.
After that this ominous Fastmem-Error-Window appears and when i try to use the home button it just freezes on please wait...
PS: I wonder if somebody is able to provide me with some Playstation1 Eumlation, because my psp just accepts pre-fixed games from the net, but i have tons of games here at home that needs a little ripping-lessons. but my homemade images that undergo the poploader procedure just wouldn't load. "The game couldn't be loaded. (80010002)" appears. I put the files exactly in the same folder like my working ones are.
-
dang, forgot that you are using 0.62 ce :>
k, just try 2 meg fast + 2 meg chip + 1 meg bogo then. and yes, 68020/68881 = 68020+fpu.
speed is not overwhelming, but acceptable ... next pspuae version is faster ;)
-
Welche Version soll ich denn benutzen, bzw. welche benutzt du denn?
-
pspuae 0.62 ce should work w/o problems
-
I havn't tried it yet, but i sure will do now. I'll report asap.
-
I am just getting a black screen now...
-
CMF: Do you have msn or icq or aim so we can talk it over, because i dont seem to get the hang of it in the near future...i could work myself up with uae for pc, which was like a struggle in a maze...but cant deal with this little uae for psp
-
CMF: Do you have msn or icq or aim so we can talk it over, because i dont seem to get the hang of it in the near future...i could work myself up with uae for pc, which was like a struggle in a maze...but cant deal with this little uae for psp
could ask cmf for his config file, ;)
-
So i officially ask cmf (or you fol) for a working configuration to get Ambermoon working...
Thanks in advance by any chance
-
Damn, i am all alone here...on my very fu***n own. When's the next release due?
-
Damn, i am all alone here...on my very fu***n own. When's the next release due?
lol, ill take a look now. ;)
EDIT:- Just downloaded Disks A, B and J to test, Used Default config and worked straight off the bat.
Its attached below this POST
Also, if you have an Options1.config file, this could be causing problems, as it overrides pspuae inbuilt default setup (that of an A500).
-
Thanks for appreciating my calls. Look:
When i load your config file and insert disk a i get the following:
_______________________
Copyright blah blah...
All rights..nag nag...
Release 1.3
Unable to load ram:: Error code 212
1>
________________________
That's what i get...what are the next steps?
What i did was pressing "dir" then start ambermoon_install (i guess) and trying to install it (u said there isnt any harddiskdrive - hdd - support yet right? So, tell me your tricks how to get it starting.
-
Thanks for appreciating my calls. Look:
When i load your config file and insert disk a i get the following:
_______________________
Copyright blah blah...
All rights..nag nag...
Release 1.3
Unable to load ram:: Error code 212
1>
________________________
That's what i get...what are the next steps?
What i did was pressing "dir" then start ambermoon_install (i guess) and trying to install it (u said there isnt any harddiskdrive - hdd - support yet right? So, tell me your tricks how to get it starting.
just to be sure, you are loading FOL's options, reseting emulation, and then inserting the ambermoon disks right? have you checked that pspuae is changin over to those new settings (higher ram i assume? etc)
when you consider that both FOL and cmf have run it ok from disks, i can only think you've missed something.
i havent played Ambermoon either, but hearing its a lot of disks, perhaps a savestate will be in order when the new version of pspuae is released. (providing it fits in Ram)
-
Im alittle lost as to why your trying to install it? install it to what?
I just downloaded disk's A to J, then loaded config i posted and reset, then inserted disk A and Disk J, then it started loading fine, it then asked for disk B and loaded to menu screen fine.
I will take a look and see if its possable to make a RAM loaded save state, then all you need to do is STATES, Ambermoon and bang its loaded, ;). As I say, ill look into it though.
Can you email me your Disk A, so I can look into the error messages you get, click my name, then my email is in my profile.
-
Firstly, thank u all for trying to help me. I appreciate it, i really do.
Now to my problem. I know, it is harder to fail at uae on windows than on the psp with its lack of options (hdd install)...but i am failing right now.
I deleted all and everything of PSP UAE from my psp and copied a fresh UAE on it (i had the xmas version, now the 0.62 2 months after-version).
My firmware is 3.10 Oe-a and winuae should definitly work i guess.
So, but i am missing some (like 3) folders (options, states...).
What were they called again, and why weren't they included in the zip/rar i downloaded from the site.
Because of that i cannot load up your config right now, because i wouldn't recognize your file when just thrown into the mainfolder of pspuae.
Without loading your config but going on with your previous plan to set ram to 4 and so on, and resetting, i get a black screen that tries to load something (gets darker, then lighter) and the red square at the upper right corner goes on and off like crazy.
And i am unable to send you an email, because of reasons unknown. (mailer daemon)
Thanks again,
Dezorian
-
hmmmm, its clearly states that the 062 2 as you put it, is just updated eboots. install 0.62 CE, then overwrite with 0.62 2 (edited eboots).
Once thats done, put all your kicks in the kicks folder etc etc.
Now your back to a working (or should be) install of pspuae.
I think your trying to do something you shouldnt, as the problem your having sounds like the older versions that had hdd option (which didnt work). When you used HDF, it would constantly reset, over and over.
Right, can you try this version, as this is the 1 i tried (German Version),
Planet Emulation Site (http://www.planetemu.net/index.php?section=roms&dat=257&page=a) <------Download from here
If your still having problems, ill zip my working install up for you and you can try that.
-
Thanks for the offer, i think i should take that chance and try your work.
I did delete my PSP UAE Folders, put a new 0.62 CE in (with all the folders i missed), then copied the 0,62.2 over and downloaded the Ambermoon files from planetemu and put them into the disks folder and the kickstarts into their folder. I also copied the pre-configured config file into the config folder and loaded it. Then i did reset my psp uae and the error message appeared again. couldnt load ram...blabla...
Then i noticed that through the loading of this ambermoon config my amiga was with 0 fastram.
Why does it load that?
Anyways, i manually put ram to 2meg, 2meg and 1 meg, then resetted and the whole black, light screen turning started again. It is constantly trying to load something, but doesnt do anything but turn black to grey, then grey to black...
I noticed that only when i chose particular configurations (like loading standardoptions for an amiga500, or chosing to have 4megs of fastram), only then i get this nowhere going black loading screen. In other cases i get that ram related error...
What i try now is to go from here with "dir", to check out that disk i inserted and start some executables from that game..
Not a chance, it tells me right after the thalion logo, with that sprite that appears and when the intro of the game is going to be loaded, that i do not have enaugh fast ram..etc.
yeah, tough luck, cause when i put 4megs of fastmem i cant reset cause the system wouldnt start.
-
K, give me 10 mins, ill zip my setup now, and pm you
-
ok, i wait, tell me when youre done. thanks man
-
ok, i wait, tell me when youre done. thanks man
Found your problem, while testing before sending to you, ;D.
You need to put Disk J in DF1 and leave it in there, if you dont it gets to logo then crashes back to CLI
An error has occurred :
File not found.
Current file : AMBER_J:Saves
Press RETURN.
Followed by;
Longer Error and explanation of problem.
I have confirmed this 6 times and it crashes every time, but if I leave Disk J in DF1: it works everytime.
-
-
I am trying that again.
But that wouldnt solve the problem with that error i get...
1.) couldnt load ram after inserting disk a
2.) need more fast ram, but when i use 4megs fastram my system wont load
k, forget that, im uploading now, once its uploaded, ill pm you.
I was only using 512kb Slow and 512kb Chip, and it worked fine, odd